Show us all your latest custom-made receptions (Steelbook..Digibook ... Digipack ... Collectors ...)

[tr0llhatt]

6 hours ago, Fortis93 said:

You need to start your own label, mate. 😁

 

Cornrow Lab.

I'm already a fan, also such a stellar name!

And welcome to the club pink mate

Edited February 1, 2023 by tr0llhatt

[Frage]

Someone knows here the radius of Steelbook's corner ?

 

Trying to create a nice fullslip etc I would like to use the same size.

 

Height is 171,4mm

Width is 134mm

Corner I don't know if it is 4 or 5 or other mm radius, no available information online, I guess specific datasheet is only accessible for company.

[Frage]

8 minutes ago, Frage said:

Someone knows here the radius of Steelbook's corner ?

 

Trying to create a nice fullslip etc I would like to use the same size.

 

Height is 171,4mm

Width is 134mm

Corner I don't know if it is 4 or 5 or other mm radius, no available information online, I guess specific datasheet is only accessible for company.

136* not 134

[nathan_s82]

Just got in some more 35MM Print

Blu-rays from Rob's Nostalgic Projects! These are original 35MM Prints rescanned into 1080p, Color Corrected and remastered. Highly Recommended!

 

First, Dawn of the Dead with SFX Bonus Disc

Next, Texas Chainsaw Massacre with Psycho and Silence of the Lambs

[R1s1ngs0n]

@BobaFett1974 THANK YOU, THANK YOU, THANK YOU, THANK YOU !!! 🤩

 

 

[Gary K]

1 minute ago, R1s1ngs0n said:

@BobaFett1974 THANK YOU, THANK YOU, THANK YOU, THANK YOU !!! 🤩

 

 

 

 

Holy cannoli.  Just friggin WOW.  WOW.  WOW.  

 

[Fortis93]

15 minutes ago, R1s1ngs0n said:

@BobaFett1974 THANK YOU, THANK YOU, THANK YOU, THANK YOU !!! 🤩

 

 

 

What's funny is that now I'm going to compare any officially released Bond steelbook to these.

 

And I'm almost positive the officially released ones are going to come up short.

 

Edited March 18, 2023 by Fortis93

[RAK]

On 2/21/2023 at 11:12 AM, nathan_s82 said:

Just got in some more 35MM Print

Blu-rays from Rob's Nostalgic Projects! These are original 35MM Prints rescanned into 1080p, Color Corrected and remastered. Highly Recommended!

 

First, Dawn of the Dead with SFX Bonus Disc

Next, Texas Chainsaw Massacre with Psycho and Silence of the Lambs

Where did you purchase these, do you have a link?

[nathan_s82]

1 hour ago, R1s1ngs0n said:

@BobaFett1974 THANK YOU, THANK YOU, THANK YOU, THANK YOU !!! 🤩

 

 

That is an amazing sight

[Veum]

1 hour ago, RAK said:

Where did you purchase these, do you have a link?

 

Could it be our one and only? 🧐 

 

Edited March 18, 2023 by Veum

[nathan_s82]

26 minutes ago, RAK said:

Thanks, so next question are these legit, or boots.

They are copies of the original 35MM prints, restored and put on Bluray. As to if they are legit, I would say yes, since they come from original 35MM Prints. Also, these are typically out of print, or are an obscure version of the film.

[Gary K]

4 minutes ago, nathan_s82 said:

They are copies of the original 35MM prints, restored and put on Bluray. As to if they are legit, I would say yes, since they come from original 35MM Prints. Also, these are typically out of print, or are an obscure version of the film.

Hey guys, these are not authorized, licensed commercial releases so are technically bootlegs.  Also we don’t advertise third parties on MP. 
 

Thanks. 

[nathan_s82]

1 minute ago, Gary K said:

Hey guys, these are not authorized, licensed commercial releases so are technically bootlegs.  Also we don’t advertise third parties on MP. 
 

Thanks. 

My apologies @Gary K.

[Gary K]

2 minutes ago, Gary K said:

Hey guys, these are not authorized, licensed commercial releases so are technically bootlegs.  Also we don’t advertise third parties on MP. 
 

Thanks. 

No worries, feel free to discuss via PM. 

[extantsrevenge]

21 hours ago, R1s1ngs0n said:

@BobaFett1974 THANK YOU, THANK YOU, THANK YOU, THANK YOU !!! 🤩

 

 

Damn that is

 

All look amazing 😍

[CAYENNE-FAHRER]

Slip-free Cover for my Amaray, with US-Slipcase

 

[Chief_lookout]

@Fortis93 @CAYENNE-FAHRER Some people have been asking for the description of how I created the custom display for the Justice League motherboxes:

I just don't wanna post it in the wrong place. Is it ok to post it here? Give me the go ahead and I'll post it here!

[Fortis93]

13 minutes ago, Chief_lookout said:

@Fortis93 @CAYENNE-FAHRER Some people have been asking for the description of how I created the custom display for the Justice League motherboxes:

I just don't wanna post it in the wrong place. Is it ok to post it here? Give me the go ahead and I'll post it here!

 

Absolutely. 

 

Go right ahead, mate. 

[Chief_lookout]

So, some people were interested in the custom display I built for my Justice League motherboxes. I will not mention where I got any of the supplies I used, as I have been asked not to advertise other sites on these forums. If you wish to know, just message me! 
I had to start with some way to display them (and not just set them on my shelf), so I got this box:

It has a mirrored base, which I liked, and an acrylic display. The problems were, the base sat on a small (about 1/2 inch) lip, and there was nothing "Justice League" about it. To fix the first problem, I cut some wood pieces and painted them black to support the weight of the motherboxes (so the base didn't sag and look stupid) and so it blended in:

I was pretty proud of myself, it fits perfect! The astute among you might notice the Justice League emblem on the front. I actually did that first. I got a Justice League keychain (it was the best thing I could find, but fits perfect on the front!) and cut the emblem part away from the leather. I then had to grind off the top part so the emblem was perfectly round. The black base part the mirror sits on is rounded on the sides, so I had to dremel out a place for the emblem to sit flush, then glue it in:

 

The next step was the name plates. I kinda wanted this to be like it might look in a museum that would display the motherboxes. So I purchased some custom gold nameplates:

Then I had to wait for them to arrive, which was the hard part! While I waited, I watched the movie again so I could see the order from left to right they went when they were going to form the unity! They then arrived! I got some protectors for them, placed them in the display, and mounted the nameplates! Now I have them displayed atop my shelf, and something very cool to be proud of!

Here they sit on my shelf, and I couldn't be happier! Thanks for going on this journey with me! I'm glad I could share this with you and hope you enjoyed it! Thanks for looking!

[Intentcoin]

On 3/31/2023 at 1:28 AM, Chief_lookout said:

So, some people were interested in the custom display I built for my Justice League motherboxes. I will not mention where I got any of the supplies I used, as I have been asked not to advertise other sites on these forums. If you wish to know, just message me! 
I had to start with some way to display them (and not just set them on my shelf), so I got this box:

It has a mirrored base, which I liked, and an acrylic display. The problems were, the base sat on a small (about 1/2 inch) lip, and there was nothing "Justice League" about it. To fix the first problem, I cut some wood pieces and painted them black to support the weight of the motherboxes (so the base didn't sag and look stupid) and so it blended in:

I was pretty proud of myself, it fits perfect! The astute among you might notice the Justice League emblem on the front. I actually did that first. I got a Justice League keychain (it was the best thing I could find, but fits perfect on the front!) and cut the emblem part away from the leather. I then had to grind off the top part so the emblem was perfectly round. The black base part the mirror sits on is rounded on the sides, so I had to dremel out a place for the emblem to sit flush, then glue it in:

 

The next step was the name plates. I kinda wanted this to be like it might look in a museum that would display the motherboxes. So I purchased some custom gold nameplates:

Then I had to wait for them to arrive, which was the hard part! While I waited, I watched the movie again so I could see the order from left to right they went when they were going to form the unity! They then arrived! I got some protectors for them, placed them in the display, and mounted the nameplates! Now I have them displayed atop my shelf, and something very cool to be proud of!

Here they sit on my shelf, and I couldn't be happier! Thanks for going on this journey with me! I'm glad I could share this with you and hope you enjoyed it! Thanks for looking!

Box looks good, now you just need to open them so you can remove all the stickers and jcards

[Fortis93]

1 hour ago, Intentcoin said:

Box looks good, now you just need to open them so you can remove all the stickers and jcards

 

#teamopenitup

[CAYENNE-FAHRER]

new to the collection

 

 

Moon Knight          Custom Steelbook with Custom Artcards & Folder

 

 

[CAYENNE-FAHRER]

new to the collection

 

 

Rise Of The Guardians          Custom Steelbook with Custom Artcards & Folder

 

 

[CAYENNE-FAHRER]

got yesterday

 

 

The Falcon And The Winter Soldier      Custom Steelbook/Custom Artcards & Custom FullSlip in production

 

 

[CAYENNE-FAHRER]

got yesterday

 

 

Prey                 Custom Steelbook/Custom Artcards & Custom FullSlip in production